Flat Out Engineering has a '49-54 Chevy front IFS crossmember that will accept `84-87 or `88-96 C4 Corvette front suspension.
(Info: 714-639-2623; www.flatout-engineering.com)
GAYLECO offers a MII setup with an increased shock mount height and this is accomplished by lowering the bottom mount or raising the upper mount or both. GAYLECO also offers a 14-inch coilover spring that provides a softer ride along with the 8- and 10-inch coilover spring.
(Info: 501-321-1130; http://gaylebridgesco.com)
Heidts builds a Mustang II suspension for your'49-54 Chevy that is complete frontend from hub to hub and UPS shippable. Prices start at $1,799.00.
(Info: 800-841-8188; www.heidts.com)
JW Rod Garage offers a Mustang II crossmember kit (or just a crossmember) that is 3/16-inch steel TIG welded and designed to fit a '49-54 Chevy's.
(Info: 888-414-8787; www.jwrodgarage.com)
Hot Rod Works sells a transmission adapter kit for a Chevy S-10 five-speed to a 216 or 235 six-cylinder. It enables a five-speed to bolt to the original passenger car three-speed bellhousing, which has a unique bolt pattern that doesn't match any modern transmission.
(Info: 208-463-1068; www.hotrodworks.com)
Bob's Classic Chevy has LED taillights. These super-bright taillights are available for all 1949-57 full-size Chevrolets; prices range from $44.99 to $119.99. LED backup lights are available separately for 1953-56 models; prices range from $89.99 to $149.99.
(Info: 866-572-4389; www.bobclassicchevy.com)
Jim Meyer Racing offers a bolt-in IFS that is a direct replacement using the same original factory holes and bolts that held the original GM suspension to the chassis. The fully assembled IFS with antisway bar can be rolled under the car and the old one out.
(Info: 800-824-1752; www.jimmeyerracing.com)
Inland Empire Driveline Service makes a steel or aluminum driveshaft when updating your'49-54 Chevy by eliminating the stock torque tube and can be used with any combination of transmission and rearend. Three simple measurements are needed to get a balanced driveshaft built.
(Info: 800-800-0109; www.iedls.com)