Lightweight Carb
Holley Performance Products has introduced the Aluminum Street Avenger carburetor. The original Street Avenger carburetors were created out of a need for a simple design that would allow anyone with no past experience in carburetors to bolt it on, make two small tuning adjustments, and drive off. Now Holley offers a lightweight version of the original with all of the world famous No Trouble features. The Aluminum Street Avenger carburetors are available in a 670 and 770cfm with or without an electric choke.
The Aluminum Street Avenger saves approximately 5 lbs off the top of an engine versus their zinc counterparts. The carbs are 100 percent wet-flow tested, and include a fuel line kit and a comprehensive installation and tuning DVD. There is a lifetime warranty on parts and a one-year warranty on labor with factory direct service.
Holley Tech Service
(270) 781-9741
(800) HOLLEY-1 (nearest dealer)
www.holley.com
Rebuild Kits
JET Performance has two rebuild kits for Quadrajet carburetors. PN 201003 is a complete, high-quality rebuild kit for JET Performance Quadrajet PN 35001, 35002, 35003, 35004, 36002 and 36004. The kit will also work on any non-electronic M4 series Quadrajet. PN 201004 fits JET Performance Quadrajet PN 34001, 34002, 34003, 34005, and 34006. The kit will also rebuild any 1966-1978 4M series Quadrajet. Both kits include complete needle and seat assembly, accelerator pump, fuel filter gasket, choke seals, body to base gasket, air horn gasket, carburetor to intake gasket and air cleaner gasket.
JET Performance Products
(800) 535-1161
www.jetchip.com
Lucky's Helmet
Miller Electric Mfg. company has added the Lucky's Speed Shop design for its Elite and Digital Elite Series of auto-darkening welding helmets. This sleek graphic design comes in a gloss-black finish and features cross-bone pistons and a flying eyeball accented by a spider web. The Lucky's Speed Shop helmet carries a MSRP of $349 for the Elite and $389 for the Digital Elite Series.
The Elite Series helmet features four independent arc sensors that respond in 1/20,000 of a second and comes standard with Auto-On/AutoOff and Grind mode.
Miller Electric MFG. Co
(800) 426-4553
www.millerwelds.com
Power R&P
Flaming River Industries has a power rack and pinion steering unit-not a remanufactured rack-featuring dramatic engineering and appearance improvements. The rack is based on the popular front-steer 1974-78 Mustang II platform, but offers several key features which make it stand apart. This is the first new Mustang II power steering designed and built in the U.S.A. for the hot rod market.
The new rack offers over 6 inches of rack travel, delivering an improvement in turning radius over any previous Mustang II-style rack and pinions.
Internally, the rack uses all-new components throughout, including a rack gear which is 20 percent larger than the stock unit for improved strength.
Flaming River Industries
(866) 815-3669
www.flamingriver.com
Clean Wipe
New Port Engineering now has a complete system for all Model As. It features linkage-driven dual wipers, a single heavy duty 12-volt self-parking motor, transmission, brackets, escutcheon plates, arms, and blades. New Port also supplies their exclusive drill fixture to simplify installation of the dual blade system.
Options include an intermittent delay switch, a washer pump kit, and stainless wiper arms and blades.
New Port Engineering
(800) 829-1929
www.newportwipers.com
Valley Cover
Finally, tall, widespread fins a little over 1/4-inch thick on the valley cover are available from Sellers Equipped. The valley cover will fit Chrysler 331, 354, and 392 engines. It is countersunk to accept stainless washers that are provided, along with stainless jam nuts and studs, as well as Loctite and an Allen wrench for installation.
Sellers Equipped
(408) 292-3900
Email: sellersequipped
@earthlink.net