Right Connection
The Jiffy-tite Quick-Connect Carburetor Kit saves time and makes changeovers a breeze. No wrenching required for a high-flow, 100 percent leak-proof seal. To connect, simply pull the socket collar back and insert the male plug on the fuel line. Then release the collar. Just listen for the click and the carb is ready to go. Disconnect with a simple pull on the collar and the valve design keeps the fuel safe inside the line, and without having to drain your fuel bowl.
Jiffy-tite Carburetor Kits are sold standard-valved in either AN size 6 or 8, with aluminum washers, and are available to work with 7/8-inch x 20, 9/16-inch x 24 and br20.
Jiffy-tite Motorsports
(888) 605-7788
www.jiffy-tite.com
Serpentine For Your Mopar
March Performance now offers for the Chrysler small-block V-8 (318, 340, 360) a one-piece alternator and air conditioning bracket hat provides rigid support for the alternator and A/C compressor. A separate bracket allows the option of power steering or no power steering. Three separate idlers guarantee the ultimate in belt to pulley contact area for sure "no slip" operation. Like all their Style Track kits it makes use of a unique easy-to-use belt tension adjustment tool. The Style Track comes complete with alternator, an alternator pulley with fan and nose cover, A/C compressor and nose cover, water pump with pulley and nose cover, crank pulley and the alternator/A/C bracket, complete with the belt tensioning tool. Kits with power steering include a Type2 remote power steering pump and the power steering pump pulley with nose cover. Kits include all mounting hardware and detailed instructions. Kit features maintenance-free clear or black powdercoating in clear, black to black Onyx.
March Performance
(888) 729-9070
www.marchperf.com
Dashing Difference
Want to install an Auburn instrument panel in your `29 Ford roadster? The Auburn dash is born from characteristics of the upper half of the original `29 dash.The lower half incorporates the contour line of the instrument panel, while maintaining the original bead style line.
Installation is quick and easy.Unscrew your original dash and simply screw in your new Auburn dash just like the originalA strengthened, widened flange allows a column drop to be bolted on to.(Will not work with stock Model A gas tank. Will accept a SO-CAL Speed Shop gauge insert.) Dashboard is paint ready or can be used in its highly finished raw state; sells for $495.00.
KT Components
kt.kendonusa.com
(800) 847-8618
Loosey Goosey
The Free All Deep Penetrating Oil 12-ounce Bullet can, featuring an improved, solid grip, is available at select auto parts stores nationwide. Free All utilizes a proven formula that quickly and easily dissolves rust and corrosion and prevents the need for torching, drilling, hammering and chiseling to free virtually any frozen fastener or part. And unlike competing formulas, the Free All silicone-free penetrant won't damage painted surfaces.
Free All Deep Penetrating Oil
(800) 660-6140
www.FreeAllOil.com
Latest Look
Schott Wheels now offers the Crossfire design featuring multi-plane spokes that converge into the Cover-Loc system giving a look of strength and sophistication. You can choose from the spanner, crescent or hex center nuts as well as alternative finish options such as our standard show polish, brushed and painted finishes, or any combination of them.
Schott Wheels
(562) 598-4411
www.schottwheels.com
Military Look
Wheel Vintiques Inc. introduces the Artillery, inspired by the GM Artillery of the `30s. Various bolt patterns from 5 on 4 to 6 on 5, ideal for both Chevy and Ford enthusiasts. Available in 15-inch diameter and with widths ranging from 5 to 10 inches with standard or custom offsets. Accepts all smoothie and rally style hubcaps, and is available bare, chrome, or powder coated. The Artillery also features a large diameter 15-inch outer for better brake clearance and more strength.
Wheel Vintiques Inc.
(559) 251-6957
www.wheelvintiques.com
Caps On
Stockton Wheel Service carries a complete line of vintage Ford licensed reproduction hub caps ('41 Ford shown).Depending on the model, Stockton's reproduction hub caps come in a chromed or polished stainless steel finish. You can use Stockton's reproduction Ford hub caps on your original 14 and 15-inch steel wheels, or on any of Stockton Wheels' custom rally steel wheels that come in 14, 15, 16 and 17-inch diameters and are available incustom wider widths to accommodate modern radial tire sizes.
Stockton Wheel Service
(800) 395-9433
www.stocktonwheel.com
Old Carb Revisited
The Stromberg 97 has long been favored by hot rodders who realized the performance qualities of this timeless carb. The Speedway Motors 9Super7TM brings the original Stromberg 97 into the 21st century. They incorporated a long list of refinements to make the 9Super7TM successful: all-new tooling, stainless steel bolts and hardware used throughout, Grose jet-style needle and seat, extended brass throttle shaft, modern Nitrophyl float, aluminum base to dissipate heat and eliminate vapor lock.
These improvements were made while maintaining the carburetor's original appearance. Features such as the choke assembly, accelerator pump, jets and cosmetics are faithfully retained. Each carburetor is individually flow tested and inspected for leaks to ensure optimum performance.
Speedway Motors
(800) 979-0122
www.speedwaymotors.com
More Gears More Better
Tremec announces the release of the T-56 Magnum six-speed with 700 lb-ft of torque capacity. The vastly-improved gears and synchronizers ride on a new one-piece countershaft and heavier duty mainshaft. Other significant features of the T-56 Magnum over the original T-56 include redesigned shift forks with integrated shift keys, a redesigned case, and vastly improved methods of manufacturing. The T-56 Magnum also incorporates user-friendly features from the TKO five-speed, including dual speedo pick ups, a fully reversible shifter, as well as, a mid-shift location for street rod applications. All T-56 Magnums feature fully synchronized forward gears as well as a synchronized reverse.
Tremec
(800) 401-9866
www.tremec.com
New Generation
The Gen IVTM Magnum features Vintage Air's exclusive fully electronic microprocessor controls which require no cables or vacuum connections. Separate high-capacity copper parallel flow heat coil and aluminum plate and fin cooling coils provide outstanding performance and instant temperature adjustments. The Magnum's new case design allows extra clearance of larger engine tunnels on later model cars. The Gen IVTM Magnum systems all offer a variety of polished aluminum or black anodized Vintage Air fly-by-wire Streamline control panels.
Vintage Air Inc.
(800) 862-6658
www.vintageair.com
Bright Light
A cloudy, milky or yellowed lens not only looks unsightly, but can affect how a car sees and is seen by others. Lens damage can reduce headlamp function at night or during poor visibility conditions. Turtle Wax's new Headlight Lens Restorer Kit makes restoring and improving headlight and taillight lens clarity easy with an all-inclusive system that costs a fraction of the price of replacement lenses.
The specialized Turtle Wax formula restores lens clarity to sun damaged, scratched and oxidized lenses. The kit includes easy to following step-by-step instructions, color coded precision sanding pads that remove lens surface damage in minutes, as well a special sanding pad spray lubricant and lens clarify compound to assure the cleaning process produces improved lens clarity.
Turtle Wax
(800) Turtle Wax (800-887-8539)
www.turtlewax.com
Li'l Hemi
A modern design cast aluminum, single four barrel, dual plane intake manifold for the 276 and 291 DeSoto Hemi engines. The VintageV8s manifold is an all new design made of cast aluminum. It weighs about 18 pounds. Square bore carburetors up to 650cfm bolt on directly. The ports are sized to match the ports on 330 to 345 heads, which are larger than the ports on 276 or 291 heads, but the manifold can be used with 276 or 291 heads without any head modifications. A Chevrolet style thermostat and housing is required and the price is $595.00 plus shipping.
VintageV8s
(941) 718-9672
email info@vintagev8s.com