Street Rodder Magazine Homepage

Homemade Tools

After the pieces were tacked in place, I then took a length of 2-inch tubing and placed it into the cradle formed by the two short lengths of angle iron and snugged it up in the vice...
Quick And Easy - Homemade Shop Tools

 After the pieces were tacked in place, I then took a length of 2-inch tubing and placed it into the cradle formed by the two short lengths of angle iron and snugged it up in the vice...  View Related Article

 

Car Research Guide
Source Interlink Media © 2008 Street Rodder,
Source Interlink Media, LLC.
All rights reserved. WEB-054