Street Rodder Magazine Homepage

1932 Ford Carson Top Install

Steve made his top jig out of square tube pieces with roll pins to locate the top bows. He welded the header, made from 1 1/2x1/2-inch channel, to the window openings. Solid oak was used for the custom-made front header bow, and plywood was fitted in the channels for tacking on top fabric.
1932 Ford Carson Top Install - The Return of the Carson Top: Part 1

 Steve made his top jig out of square tube pieces with roll pins to locate the top bows. He welded the header, made from 1 1/2x1/2-inch channel, to the window openings. Solid oak was used for the custom-made front header bow, and plywood was fitted in the channels for tacking on top fabric.  View Related Article

 

Car Research Guide
Source Interlink Media © 2008 Street Rodder,
Source Interlink Media, LLC.
All rights reserved. WEB-063