Street Rodder Magazine Homepage

Crate Creations Part Iv

Preparing to degree the cam is the next step in the process. The degree wheel is attached to the crank snout and a pointer fashioned from a length of mechanics wire. The crank is then rotated to top dead center (TDC) and the pointer aligned with the TDC mark on the wheel.
Crate Creations:Part IV

 Preparing to degree the cam is the next step in the process. The degree wheel is attached to the crank snout and a pointer fashioned from a length of mechanics wire. The crank is then rotated to top dead center (TDC) and the pointer aligned with the TDC mark on the wheel.  View Related Article

 

Get Adobe Flash player

Car Research Guide
Source Interlink Media © 2008 Street Rodder,
Source Interlink Media
All rights reserved. WEB-063