Street Rodder Magazine Homepage

Custom Battery Box

In keeping with the requirements of a true battery box, Frank fabricated a lid. While we don't have photos of its construction, we can best describe it as a flat panel with a perimeter flange on three sides. He made that by notching two corners and folding over both of the long sides and one short side by about 3/4-inch.
Custom Battery Box - Thinking Inside The Box

 In keeping with the requirements of a true battery box, Frank fabricated a lid. While we don't have photos of its construction, we can best describe it as a flat panel with a perimeter flange on three sides. He made that by notching two corners and folding over both of the long sides and one short side by about 3/4-inch.  View Related Article

 

Get Adobe Flash player

Car Research Guide
Source Interlink Media © 2008 Street Rodder,
Source Interlink Media
All rights reserved. WEB-070