Street Rodder Magazine Homepage

Model A Chassis Assembly

I centered the rearend assembly so the backing plates were equal distances from the framerails and attached the spring to the still-unattached spring hangers, using a small bottle jack to set my pinion angle to a 3-degree upward orientation.
Model A Chassis Assembly - From 'Rails To Rollers

 I centered the rearend assembly so the backing plates were equal distances from the framerails and attached the spring to the still-unattached spring hangers, using a small bottle jack to set my pinion angle to a 3-degree upward orientation.  View Related Article

 

Get Adobe Flash player

Car Research Guide
Source Interlink Media © 2008 Street Rodder,
Source Interlink Media
All rights reserved. WEB-054