Street Rodder Magazine Homepage

Model A Chassis Assembly

With the spindles mounted, the next step (in this case, anyway) is to attach the backing plates (I used F-100 drum brakes) and steering arms to the spindles. The steering arm with two ball joint holes is located on the right side in a cross-steer application.
Model A Chassis Assembly - From 'Rails To Rollers

 With the spindles mounted, the next step (in this case, anyway) is to attach the backing plates (I used F-100 drum brakes) and steering arms to the spindles. The steering arm with two ball joint holes is located on the right side in a cross-steer application.  View Related Article

 

Get Adobe Flash player

Car Research Guide
Source Interlink Media © 2008 Street Rodder,
Source Interlink Media
All rights reserved. WEB-071