Street Rodder Magazine Homepage

Model A Chassis Assembly

After the backing plate and steering arm were bolted in place, I then slipped the drum/hub assembly onto the spindle and installed the spindle nut to keep it on. The procedure was then repeated on the left side of the axle.
Model A Chassis Assembly - From 'Rails To Rollers

 After the backing plate and steering arm were bolted in place, I then slipped the drum/hub assembly onto the spindle and installed the spindle nut to keep it on. The procedure was then repeated on the left side of the axle.  View Related Article

 

Get Adobe Flash player

Car Research Guide
Source Interlink Media © 2008 Street Rodder,
Source Interlink Media
All rights reserved. WEB-040