Total Performance King T - Hot Rod Girl: Part II
|
Proper prep is the key, as is the case with any coating or paint. Jim had me check out the KBS Web site to read up on the stuff, so I'd know why we were using it in the first place, and to see that there is a correct way to prep the metal to get all of the coating's advantages. There's a three-step process to do it right: cleaning the surface, using AquaKlean; surface rust removal, using RustBlast; and then coating the surface with RustSeal, the colored rust-preventing coating. Though most of you will more than likely spray the stuff, I opted to brush on the coating-after following the first two cleaning and de-rusting steps, of course. It went on easily, covered in one coat, and flowed out nicely. View Related Article
|
|