BESTgaket Rope Seals Stop Y-Block Leaks - Rope Tricks
|
Included in the kit are a trimming knife, a trimming gauge, and a wood stick to keep your thumb from being sliced. Trim the rope about 0.015-inch proud using the gauge. Slice through the rope and slightly into the stick to ensure a clean cut. Press protruding ends down flush, pushing any loose strands toward the center of the rope end. Perform this trimming process at both ends of the rope. Repeat the above process, minus the roll pin, for the rope-seal-to-block installation. Apply red assembly lube to the rope seal and seal journal surfaces, keeping the rope ends dry. Do not use any sealant at the rope ends. Drop in the crankshaft. View Related Article
|
|