Lowering a Ford Model A Using POSIES' ElliptaSlide Spring Kit - Elliptics
|
The completed suspension assembly, with the quarter-elliptics installed with a stock I-beam and split 'bones. Since the axle wasn't changed during the build process, it's still 8.5 inches off the ground, but you can lower it further with a dropped I-beam axle. But the big difference is where the chassis ended up-more than 7 inches lower than what it rolled in with. After the engine, radiator, and headlights are mounted, a Panhard bar will be added (making sure it will clear the other components). View Related Article
|
|