1933 Factory Five Racing Ford Hot Rod Part II- New Age Hot Rod: Part II

The completed pedal box area is well executed with all necessary lines run, and clutch and brake pedals hung in place.

With the same quality components anchored at the corners of the chassis, the braking system is both good looking and will provide plenty of stopping power for the hot Ford V-8.

This close-up illustrates the custom mount designed for the external hydraulic slave cylinder securing it to the casing of the Tremec five-speed transmission. Note also installed is the flexible stainless steel supply line from the Wilwood master cylinder.

FFR supplies a complete custom made wiring harness with each car that includes a detailed installation manual, all required switches and relays, fuse panel, and ready to use mounting hardware.

It didn't take long to get the wiring harness mounted. Once established, it took him no time to route everything as all the wiring is pre-labeled for its individual applications.

Along with the grille, the cooling system package includes a custom-designed heavy duty aluminum radiator with a built-in transmission cooler, an electric cooling fan, and hose end mounts for the stainless steel radiator hoses.

Completing the cooling package are stainless steel radiator hoses which can be cut to length for each individual application, a polished stainless steel overflow tank, a radiator cap, mounting brackets, and mounting hardware.

Jason Souza (right) got help from fellow team member Ronnie Landers for the installation of the radiator and grille assembly (they must be mounted as a single unit).

The hood hinge kit is incorporated into the radiator and grille mounting assembly and features gas support struts and a polished stainless steel prop rod.

Once the radiator assembly was mounted in place, Jason measured the approximate length for the top stainless steel radiator hose and cut it to the length.

With the radiator lines in place its easy to see just how clean the installation came out. All related hose end mounts and clamps are included in the cooling package.

Wow, talk about moving forward with the build; having accomplished the installation of the braking, cooling, fuel, and initial electrical systems.