Gas Alley Street Rods Cowl Steering Conversion Kit - Side-Steering Made Simple
|
After celebrating the fact that I didn't wreck my cowl by drilling the hole off center I proceeded to attach the extension shaft to the adapter using the Grade-8 nuts, bolts and lock washers supplied in the kit. Once in place I then measured how much of the extension shaft I'd have to remove so that the Pitman arm would end up in line with the steering arm at the front spindle. If you look close at the end of the extension you'll see a yellow dot. That dot is one of three that Gas Alley puts on the shaft as locators for holes to be drilled for rosette welds when attaching the machined end to the shaft. View Related Article
|
|