Hot Rod Front End - More Bang For Your Buck - Tech
|
The next step is to assemble the Pete & Jakes hairpin radius rods. The longer bars of the radius rods go on the bottom. The front clevis' threads should be treated to a coating of anti-seize and threaded into the hairpin tubes (don't forget the jamb nuts) as are the rear ones. With Pete & Jakes radius rods the rear mounting positions are 37-5/8-inches rearward of the front axle centerline. Keep in mind the radius rods should wind up as close to horizontal as possible when the car is at finished weight (engine/trans etc. installed) and at ride height. View Related Article
|
|