Hot Rod Front End - More Bang For Your Buck - Tech
|
With the kingpins, spindles, and steering arms in place, the next step was to locate and install the front shock mounts. P&J upper shock mounts are designed for use with 4-inch dropped axles so keep in mind using them with a stock axle or one with less of a drop may cause the spindle steering arm to hit the shock. If this is the case in your situation you can either rotate or swap the lower shock mounts side to side to provide clearance. In the case of a Model A the upper mount will be located 2-1/4 inches rearward of the upper rearmost fender brace hole (on '32 Ford rails they're located 3-1/8 inches rearward of the fender brace holes). View Related Article
|
|