Powerful Relay

PerTronix Ignitor II and III ignition systems require a full 12V power connection between the ignition switch and the positive coil terminal, which requires bypassing the ballast resistor or resistor wire. In many cases, the original resistor wire is buried the vehicle’s wiring harness. Adding a PerTronix power relay (PN 2001) will eliminate digging through the wiring harness and replacing wires.

This 30-amp relay kit can also be used with the original Ignitor conversion kits or to power accessories as well.

PerTronix

(909) 599-5955

www.pertronix.com

Very Cool, Very Slick

A lineup of nostalgic drag slicks and custom wheels from Radir Wheels are available in 14-, 15-, and now in 16-inch. They are made in the United States.

Radir Wheels

(866) 334-3470

www.radirwheels.com

Power to the Windows

Watson’s StreetWorks now offers illuminated oval billet five-wire power window kits with grooved switches. Watson’s has added grooves to the switch for looks and tactile ease during operation and more lighting holes for the illumination on these five-wire rocker switches to shine through. The single oval frame measures 2-11/16 inches wide by 1-15/16 inches high; the double is 3-1/8 inches wide by 2-1/4 inches high. Frames mount with blind studs from behind. As always, the kits come complete with all necessary wire hookups as well as installation instructions.

Watson’s StreetWorks

(860) 859-0513

www.watsons-streetworks.com

Crank This

For all Ford Model A/Model T engines, this is a chromoly forged crankshaft that features a fully machined exterior profile and ground to exacting tolerances. All four counterweights are machined to exact symmetrical position and mass that are then electronically balanced to +/- 2 grams. They are then micro-polished for maximum bearing wear.

SCAT Enterprises

(310) 370-5501

www.scatenterprises.com

Small Package, Big Punch

Performance Automatic now offers a Guaranteed Forever 200-4R Street Smart Package. Dyno-tested and ready to bolt in, this 200-4R Stage 2 transmission is capable of handling up to 400 hp. Expertly assembled using Alto Red Eagle clutches and bands, Performance Automatic adds in a rebuilt pump and modifies the valvebody’s shift characteristics. They also finish it off with a deep aluminum pan with a drain.

The PA20104 2004R Street Smart Package includes

their Stage 2 transmission, 2,200-2,400 stall converter, new trans mount, throttle cable kit, dipstick, and filler tube. Lifetime warranty included.

Performance Automatic

(301) 963-8078

www.performanceautomatic.com

Tri-Five Hood Hinges

Eddie Motorsports manufactures billet aluminum trunk hinges for ’55-57 Chevrolets. The hinges are CNC-machined from billet 6061-T6 aluminum and offered for hardtop, post, and convertible models.

Eddie Motorsports hinges are available in a variety of finishes, including machined or brilliant polished, black or clear anodized, and a wide variety of Fusion-coated colors. The hinges employ Nitrogen filled gas shocks and high-quality Delrin bushings for a smooth, reliable operation that is far superior to the stock hinges and their torsional springs. Designed as direct fit, “bolt-on” units, the hinges utilize the stock mounting holes (they do require some minor drilling for the shock mount). Prices start at $275 per pair.

Eddie Motorsports

(888) 813-1293

www.eddiemotorsports.com

Affordable IFS

Fatman’s Affordable IFS is engineered for Model A’s, ’32 Fords, ’28-33 GM cars, and early Mopars with similar fenders that fit directly to the frame. Rather than modifying a Mustang II IFS to fit, with all the attendant track width and bumpsteer problems, this IFS design provides a 56-inch track width, rear steer rack-and-pinion, which will clear fenders, and radiator aprons while maintaining proper geometry. This kit has just been updated to use a manual rack provided by Maval/Unisteer.

Fatman Fabrication

(704) 545-0369

www.fatmanfab.com

Hide-a-Vent

No need to cut unsightly holes into your pristine factory original dashboard with Moal Coachbuilders “Hide-a-Vent.” The aircraft-grade billet aluminum nozzles mount to the underside of the dash. They pop into place when your A/C or heat is on or they can be easily flipped up and out of sight when not in service.

Moal Coachbuilders

(510) 834-9066

www.moal.com